# Calculation Context Issue **URL:** \ **Category:** Questions & Answers\ **Created:** [October 1, 2020, 6:23am UTC](https://community.eazybi.com/t/calculation-context-issue/5337 "2020-10-01T06:23:54Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Jbhere](https://community.eazybi.com/letter_avatar_proxy/v4/letter/j/90ced4/32.png) [@Jbhere](https://community.eazybi.com/u/Jbhere)\ **Post date:** [October 1, 2020, 6:23am UTC](https://community.eazybi.com/t/calculation-context-issue/5337/1 "2020-10-01T06:23:54Z")
I will be doing defect density, as part of this exercise calculating #of defects/ #of story points for each phases. Problem is I do not have story points captured in all the defects which was created in Jira. So wherever there is no story points I will be assuming 2 story points be default. My expected report structure is like this. With Project and Sprint as page filter | Phase Detected | #of Defects | Story Points | Defect Density% | | --- | --- | --- | --- | | All Phases | 17 | 47 | 36% | | SIT | 10 | 25 | 40% | | UAT | 7 | 22 | 31.8% | There is a possibility under SIT phase 5 defects are defined 3 story points each and remaining 5 defects there is no story points defined in Jira. So instead of blank I will be assuming 2 story points for each defects total will be 10 story points (5_2) + already 15 story points defined for 5 stories (5_3) as combined = 25 . Values which I am getting | Phase Detected | #of Defects | Story Points | Defect Density% | | --- | --- | --- | --- | | All Phases | 17 | 27 | 63% | | SIT | 10 | 15 | 67% | | UAT | 7 | 22 | 31.8% | I can see this in context issue, but I’m not sure how to resolve this. ASK: How to write formula to satisfy my requirement. ---
**Author:** ![martins.vanags](https://community.eazybi.com/user_avatar/community.eazybi.com/martins.vanags/32/8905_2.png) [@martins.vanags](https://community.eazybi.com/u/martins.vanags)\ **Post date:** [October 5, 2020, 3:16pm UTC](https://community.eazybi.com/t/calculation-context-issue/5337/2 "2020-10-05T15:16:16Z")
Hi, Here you could try using a custom Javascript code in import options page to manually import 2 Story points for issues without story points. Just make sure that you use your Story point custom field ID instead of NNNNN ``` if(issue.fields.customfield_NNNNN == null){ issue.fields.customfield_NNNNN = 2 } ``` see more about custom fields here: > **[Custom JavaScript code - eazyBI for Jira](https://docs.eazybi.com/eazybijira/data-import/advanced-data-import-options/custom-javascript-code)** Martins / eazyBI support